Pressure Systems, Inc. 98RK-1 & 9816 User’s Manual©
Page 18 www.PressureSystems.com
Connect to any module. (When a connection has been established, the top of the module icon
will turn yellow.)
STEP 18
Select (left click) the module's icon in the Node map. Right-click on the module's
icon (in either the Node Map or the description box), and select (left click) on
"Connect" in the pull-down menu that appears. (See screen depiction below.)
As stated above, if the module's icon does not turn yellow when selected, the module did not
connect. Some possible causes for a failure to connect are:
• There is an IP address incompatibility between the host computer and the module.
• There are two modules with the same IP address.
For complete instructions on using NUSS for operating your modules, please refer to the NUSS
User's Manual, available from Pressure Systems.
