MN15-en-GB_V1.3 4/15
9
FUSE REPLACEMENT
1. Disconnect the test leads from the meter.
2. Remove the 2 Phillips head screws located on the back of the instrument and remove the
battery cover.
3. Gently remove the fuse(s) and install the new fuse(s) into the holder(s).
4. Always use fuses of the proper size and value (200mA/660V ceramic fast blow for the mA / µA
ranges, 10A/250V ceramic fast blow for the A range).
5. Secure the fuse/battery compartment cover.
WARNING: To avoid electric shock, do not operate your meter until the fuse cover is in place and
fastened securely.
Range Specifications
Function Range Resolution Accuracy
DC Voltage
(V DC)
200mV 0.1mV
(0.5% reading + 2 digits)
2000mV 1mV
20V 0.01V
200V 0.1V
(0.8% reading + 2 digits)
600V 1V
AC Voltage
(V AC)
200V 0.1V
(1.2% reading + 10 digits
(50/60Hz)
600V 1V
DC Current
(A DC)
200mA
100A (1.2% reading + 2 digits)
10A 10mA
(2.0% reading + 2 digits)
Resistance
200 0.1
(0.8% reading + 2 digits)
2000 1
20k 0.01k
200k 0.1k
20M 10k (1.5% reading + 2 digits)
Battery Test
9V 10mV
(1.0% reading + 2 digits)
1.5V 1mV
Temperature
-20°C to 750°C 1°C
(3% of reading +5°C/9°F)
-4°F to 1400°F 1°F
Notes:
Accuracy specifications consist of two elements:
(% reading) – This is the accuracy of the measurement circuit.
(+ digits) – This is the accuracy of the analog to digital converter.
Accuracy is stated at 18
o
C to 28
o
C (65
o
F to 83
o
F) and less than 75% RH.
