
110
Troubleshooting
Sound not clear
❍ If speech sounds muffled in a system with a centre speaker,
check that sound is coming from the centre as there may be a
connection problem. In a digital or Meridian feed to the centre
you may have set it up to be right instead of left so that it is
playing a subwoofer signal.
❍ If speech sounds muffled in a system with no centre speaker,
you may have selected a layout that expects one. See To
specify the speaker layout, page 85.
Centre not working
There may be a connection problem.
❍ In a digital or Meridian feed to the centre, you may have set it
up to be right instead of left, and therefore it may be playing a
subwoofer signal.
There is a hiss when starting DTS
LaserDiscs
The DTS audio stream is indistinguishable from a PCM audio
stream; the 568 takes 30ms to identify the encoding, during
which a hiss is heard.
❍ With non-video DTS sources you can add a 30ms delay to
avoid this.
❍ With video sources you can create a DTS-only source to avoid
any hiss.