22
Care and cleaning
Removing and replacing the side racks
Use a flat-head screwdriver or a small coin to
loosen the fixing screws.
When replacing the side racks, make sure that
you tighten the fixing screws.
Removing and refitting the sliding shelf supports
Important!
Remove the side racks first to make removing the sliding shelf supports easier.
The sliding shelf supports can only be used on shelf position 1, 3 and 4.
They cannot be used on shelf position 2.
When refitting the sliding shelf supports, make sure that you fit:
the side racks first
the slides to the top wire of the shelf position
both sides of each pair of slides
both slides on the same level.
Left
Do not use that level
Right
Refitting the sliding shelf supports
1
2
1
Removing the sliding shelf supports
