• Position the keyboard so it faces up.
• Fit a leg assembly to the side of the keyboard, as shown.
• Turn the knob clockwise to secure the leg assembly to the keyboard.
Make sure the knob is fully tightened.
• Repeat this procedure to attach the other leg assembly to the keyboard.
• Rotate the hangers up and “snap” them into place.
• Attach the toys to the hangers and tabs as shown.
• Slide the mode switch to . Press the keys to play note by note like a
real piano, as stars light up.
• Slide the mode switch to . Press the keys to hear notes that sound
like they’re sung by a children’s chorus.
• Locate the volume switch on the bottom of the keyboard. Adjust volume
to high ; or low , for your child’s comfort.
Hint: If your child is not actively playing with this toy, it turns off
automatically (sleep mode).
• Be sure to slide the stage switch to the off O position when not in use.
• Slide the stage switch to for use with standing toddlers.
Leg Assembly
Knob
Tab
Hanger
Leg Assembly
• While pressing the star buttons on a support, fit the end of the support
into the large slot in one of the legs, as shown. Push the support until it
“snaps” into place.
• Repeat this procedure to attach the other support to the remaining leg.
If you have not used this toy before, and are assembling it for
first-time use in Stage 3, start with Step 2.
Stage 3 - Stand & Play Piano
6
Stage Switch
Mode Switch
2
1
To change from Stage 2 to Stage 3
• Turn the threaded knobs counter-clockwise and detach the leg
assemblies from the keyboard.
• Press the star buttons and remove the two
supports from the legs. Now, proceed to step 2.
Star Button
Support
Leg
Large Slot
3
4
