10
•Position the lights ‘n sounds tray on a flat surface, with the
roller facing you.
•Position the mirror base, with the mirror toward you.
•Fit the mirror base onto the lights ‘n sounds tray.
26
•Turn the assembly over.Insert four #8 x 1
3
/8" screws into the
bottom of the lights ‘n sounds tray and tighten.
Assembly is now complete.
27
Mirror Base
Lights ‘n
Sounds Tray
•Fit the bottom edge of the pad around the bottom edge
of the seat.
• Hook the elastic loops on each side of the pad to the peg
on the back of the accessory bins.
25
Elastic
Loop
Elastic
Loop
#8 x 1
3
/
8
”Screw - 4
Shown Actual Size
Battery Installation
•Locate the battery compartment door on the swing frame.
• Insert a coin into the battery compartment door and pry the
battery compartment door off of the swing frame.
• Insert four “D” (LR20) alkaline batteries as indicated inside
the battery compartment.
•Replace the battery compartment door.
Battery
Compartment
Door
Swing
Hint: When swinging,sound or power L.E.D.slows/dims/stops,
it’s time to replace the batteries! We recommend using alkaline
batteries for longer battery life.
AssemblyAssembly
