A SERVICE OF

logo

Open as PDF
next previous
Shelf
Slots
Keyboard
Legs
• Place the keyboard face down on a flat surface.
• Fit the legs into the half circle indents in the keyboard.
Note: The legs are designed to fit one way.
• Insert three #8 x
3
/4” (1.9 cm) washerhead screws into each leg
and tighten.
• Position the shelf, as shown.
• Fit the ends of the shelf into the slots in legs.
• Fit a foot onto each leg.
Note: The feet are designed to fit one way.
• Insert three #8 x
3
/4” (1.9 cm) screws into each foot and tighten.
Feet
Assembly
5
5
1
2
• Insert two #8 x
3
/4” (1.9 cm) washerhead screws into each end
of the shelf and tighten.
3
4