5
Crib Attachment
IMPORTANT! Always attach all provided
fasteners (strings, straps, clamps, etc.)
tightly to a crib or playpen according to
the instructions. Do not add additional
strings or straps to attach to a crib.
Check frequently.
IMPORTANT! If you are attaching this toy
to a crib side rail that can be lowered and
raised, make sure the crib side rail is in the
raised (locked) position whenever a child is
in the crib.
Position the toy inside the crib.•
Wrap the attachment strap around the •
top of the crib rail.
Slide the end of the attachment strap •
under the tabs on the back of the toy.
Fasten the attachment strap slot to the •
peg on the back of the toy.
NOTE: This toy should be snug against the
crib rail and spindles. Use the strap slot that
provides the tightest fi t.
Tie the toy’s strings to a crib spindle.•
NOTE: It is better to tie the strings in a
knot than a bow, since a bow may be
easily untied.
Make sure the distance between the •
bottom of the product and the crib
mattress is at least 7 inches (18cm).
If the distance is less than 7 inches •
(18cm), readjust the attachment strap to
lift the product; or lower the crib mattress.
7" (18cm)
Slot
Crib Spindle
1
2
1
3
1
1
Peg
Attachment Strap
Crib Rail
Tab
