BX600 S3 Operating Manual 103
Fibre Channel I/O Blades 4/4 Gbit FC Switch Blade SW4016 4D
Control and Connection Panel
Figure 51: Control and connection panel of the 4/4 Gbit Fibre Channel Switch Blade
1 External FC connection (6x)
socket for LWL or SWL FC SFP module (see section “Fibre Channel SFP Module” on
page 107).
2 RJ45 LAN connection
with two integrated status LEDs (see items 6 and 7)
3 FC switch blade voltage status display (green LED)
lights up when the basic unit is switched on (12 V input voltage present).
4 FC switch blade status display (2-color LED)
Dark: FC switch blade is not operating
Lights green: FC switch blade is operating
Lights amber: Boot phase; one or more ports are off-line
Blinks amber/green: Warning: a fault has occurred.
I The LED might also blink while testing.
5 Management blade display (2-color LED)
Lights up when the FC switch blade is being controlled directly via the management
blade user interface.
6 LAN speed display (green LED)
Dark: LAN transfer rate 10 Mbit/s
Lights green: LAN transfer rate 100 Mbit/s
6543 7 8 9
12
