A SERVICE OF

logo

5.3 Replacing Consumables
ScanSnap! fi-4110EOX2 Operator's Guide 61
TROUBLESHOOTING
5
Replacing the Pick Roller
Replace the Pick roller by the following procedure.
1. Remove the document if there is a document on the ADF paper chute.
2. Open out the ADF towards you while lifting up the cover open lever.
3. Remove the ADF paper chute.
4. Remove the Pick roller.
Push the claw on the Pick roller inwards, lift up the handle while turning it in the direction of
the arrow, and remove the Pick roller. The shaded part in the figure is the part to be replaced.
ADF
Cover open leve
r
Claw
Handle
Replace shaded part.