6-30
4. Press or .
The displayed option changes (SCSI, VIDEO,
TP_IF ).
5. When the desired interface appears, press
ENTER
to save the change.
The LCD returns to the <<SETUP MODE>>
menu screen (Interface).
6. To quit the <<SETUP MODE>>, turn off the
power.
Interface
VIDEO
<<SETUP MODE>>
Interface
TP_IF baud rate
This function sets the baud rate (signaling speed) according to the baud rate of the third party inter-
face (TP_IF). At least, set the speed slower than that of the host interface.
NOTE
You cannot use this function when the setup mode is brought by pressing
in the Ready
status.
Remarks
Unit: baud
LCD display
TP_IF Baud Rate
Options
2400, 4800, 9600, 19200 (Default: 9600)
1. In <<SETUP MODE>> initial screen, press
ENTER
.
The <<SETUP MODE>> menu screen
(Settings or Paper Length Check) appears.
NOTE
The “Settings” screen does not appear and
the “Paper Length Check” screen first ap-
pears when your scanner is not controlled
through the video or TP interface.
<<SETUP MODE>>
<<SETUP MODE>>
Settings
<<SETUP MODE>>
Paper Length Check
The following is an example of operation when you use this function.
