A SERVICE OF

logo

showdomainmode(8)
288 XSCF Reference Manual Last Revised January 2007
EXTENDED
DESCRIPTION
If the Mode switch on the operator panel is set to "Service", the settings have
the following values regardless of the domain mode displayed by the
showdomainmode(8) command:
Diagnostics Level: operates as the showdomainmode(8) command
display
Secure Mode: off
Autoboot: off
When the OpenBoot PROM environmental variable 'auto-boot?' has been set
to false, the auto boot function is disabled.
The setdomainmode(8) command sets a domain mode.
EXAMPLES
EXAMPLE 1 Displays the current state of the operation mode for domain ID 0.
EXIT STATUS The following exit values are returned:
SEE ALSO setdomainmode(8)
XSCF> showdomainmode -d 0
Host-ID :0f010f10
Diagnostic Level :min
Secure Mode :on
Autoboot :on
0 Successful completion.
>0 An error occurred.