LSI Specification
Rev.1.0 Fujitsu VLSI
11.2.2 Self-ID Packet Receive after Transmitting Ping Packet Ping
Regardless of s-ID store bit setting in the mode-control register (refer to 7.1), the device receives self-ID packet after a ping
packet transmitted and stores the data removing logical inverse section in the Asynchronous receive-FIFO.
<< Flow chart from transmitting of Pig packet to receiving Self-ID packet Ping
<Host> <Device>
Figure 11.2.2.1 Flow example of operation from Pin packet transmitting to Self -ID packet receiving
Issue Send PHY packet(21h)
Issue instruction.
Receive Transmit PHY packet (21h) instruction.
Read Asynchronous transmit buffer.
Transmit Ping packet.
Arbitration result
Report Physical packet send interrupt (INT25)
(assert XINT).
Store received Self-ID packet in
Asynchronous receive buffer.
Arbitration procedure
Read Physical packet send interrupt
(INT25)
Lost
Won
Store ping packet to be transmitted in
Asynchronous receive buffer.
Store pin packet (two word) to be
transmitted in Asynchronous transmit
Report Self-ID packet received
interrupt(INT29) (assert XINT)
Read Self -ID packet received interrupt
(INT29)
recv busy=1
