A SERVICE OF

logo

E-26
SELECTING INPUT MODE
RGB INPUT MODE
1
RGB1 mode
Press the buttons to
select the input mode.
You can select from VIDEO 1 mode to VIDEO 6
mode.
The video modes corresponding to each input
terminal are as follows.
VIDEO1: SCART
VIDEO2: SCART
•VIDEO3: Video, S-video
VIDEO4: SCART
VIDEO5: Component video
VIDEO6: Component video
*For selection of the input terminal, see
“SETTING THE INPUT TERMINALS” on
P. E-41.
1
*You can also use the buttons
on the display’s control
panel to perform these steps.
VIDEO INPUT MODE
Video1 mode
Press to select the
input mode.
You can select between the modes from RGB1 to
RGB3.
The input terminal of each RGB mode is as
follows.
RGB1: DVI-D
RGB2: mD-sub
RGB3: mD-sub
*For selection of the input terminal, see
“SETTING THE INPUT TERMINALS” on
P. E-41.
03.10.24, 0:47 PMPage 26