Care and Cleaning
USERMAINTENANCE
INSTRUCTIONS
The tub.
The porcelain is
self-cleaning. Leave lid open after
washing
toallow moisture to
evaporate. Do not use harsh
or gritty cleansers.
The exterior. Wipe off any spills of
washingcompounds. Wipeor dust
with dampcloth. Trynot to hit
surfacewith sharpobjects.
To store washer:
Ask service technicianto remove
waterfromdrainpumpandhoses
to preventfreezing.
Do not storethe washerwhere it
will be exposed to the weather.
For long vacations:
Be sure water supply is shut off at
faucets and drain all water from
hoses if weather will be below
freezing.
I
A
.
Lubricate
}
with grease
or
Petroleum
Jelly.
The Activato# agitator. Remove
at regularintervals-about 4 to 6
months-and removeany lintthat
mayhaveaccumulated.No tools
areneeded, simply graspagitator
with bothhandsandpull straight
up sharply.The slottedsection at
tie top of the metal shaft has a light
coating of lubricant to prevent parts
sticking together. If this area
appears to be dry, apply a light coat
of grease or petroleum jelly around
the slotted section of the shaft
before replacing the agitator. Do
not overgrease.
When replacing the agitator,
caretilly lower straight down onto
the shaft so that it fits into the slots.
Then apply downward pressure
until agitator snaps into its normal
position.
How to remove limestone
deposits from clogged
Filter Flo@pan
● Soak filter pan in a preheated
160°F.(71°C.)solution of half
vinegar and half water for U
minutes. Then brush each side of
pan with a stiff bristle brush while
flushing with running water.
CA~IONS:
● Do not soak in porcelain
container. Vinegar can damage
porcelain.
c Do not exceed 180“F. (82 ‘C.)
or filter pan may warp.
-..
w
26
