18
Setting and storing radio stations
Automatic station search
After the hi-fi system has been connected to the mains for the first
time, the device in tuner mode searches for the 40 stations with the
best reception and stores them.
1 After connection, switch on the hi-fi system by pressing
»ON OFF«.
2 Press »FUNCTION« to select TUNER as the input source.
– Display: e.g. »3« for the station, the frequency in rapid run-
through and »PROG«.
– The search has started. After the search has finished, you will
hear the station stored at preset position 1.
Notes:
The automatic station search can be interrupted by briefly
pressing »
7«.
The automatic station search can be repeated any time by
pressing and holding down »P/RANDOM/Ȅ« until the fre-
quency display switches to rapid run-through. The stations
stored previously will be deleted.
Automatic station search
1 Switch on the hi-fi system by pressing »ON OFF« and select
the input source TUNER by pressing »FUNCTION«.
– Display: »TUNER«, then the wave band and frequency or
station name.
2 Press »BAND« to select the frequency band (FM or MW).
– Display: »FM« or »AM«.
3 Activate the station search by pressing »A TUNING S«
until the frequency display changes to rapid run-through.
– The search stops when a station is found.
Manual station search
1 To move the frequency forward in steps, briefly press
»A TUNING S« several times.
– The frequency changes in 50 kHz steps (FM) or in 9 kHz steps
(MW).
SETTINGS
_____________________________________________
3 89.55
PROG
TUNER
FM 87.65
ENERGY
PROG
MHz
!
f
MHz
