OM-4418 Page 18
5-4. Connecting To Weld Output Terminals
803 469-D / 226 005 / 803 778-A
1 AC Weld Output Terminals
Connect work and electrode cable
to weld terminals. (Polarity does no
matter for AC welding.)
! Failure to properly connec
weld cables may cause ex
cessive heat and start a fire
or damage your machine.
2 Weld Output Terminal
3 Supplied Weld Output
Terminal Nut
4 Weld Cable Terminal
5 Copper Bar
Remove supplied nut from weld
output terminal. Slide weld cable
terminal onto weld output termina
and secure with nut so that weld
cable terminal is tight against cop
per bar. Do not place anything be
tween weld cable terminal and
copper bar. Make sure that the
surfaces of the weld cable termi
nal and copper bar are clean.
Tools Needed:
3/4 in
1
5
3
4
Do not place
anything between
Correct Installation
Incorrect Installation
2
weld cable terminal
and copper bar.
