08
Handle positions
The handle of your cleaner has
three positions: upright for storage
and for when using cleaning tools; oper-
ating position for general operation on
carpets and floors; low for reaching
under low furniture. Step on handle
release pedal (E), then pull handle back
to lower handle.
19
Embedded DirtFINDER™
feature (some models)
With red and green lights, the
DirtFINDER™ system alerts the
user to areas of carpet that may need
more cleaning attention. It is able to
sense when embedded dirt is removed.
The clean light (green) will remain on
throughout cleaning except when the
detector senses that a larger amount of
dirt is being picked up; then the dirty
light (red) will come on.
When the dirty light is on, you should
take additional cleaning strokes in the
area until it changes to clean.
20
Carrying cleaner
The cleaner can be carried by
placing hand under the carrying
handle and lifting.
18
D
To move your cleaner from room
to room, put handle in upright
position, tilt cleaner back on rear wheels
and push forward.
17
Transporting cleaner
Cord clip
To help keep the cord out of the
way while vacuuming, position
cord in cord clip (D), located on the
back of the Tag Along™ grip.
16
To return cord for storage, hold
plug and press on button (C) at top
of cord reel. To prevent cord from whip-
ping, hold plug until cord is rewound.
15
C
