11. Software Update
GB64
User’s Manual
11.2 Updating Software from Menu
You can set update software automatically.
1. Press the MENU button.
2. Select Installation using the / button and press the OK or
button.
3. Enter the password using the NUMERIC(0-9) buttons.
4. Select Software Update using the
/ button and press the
OK or button.
5. Automatically search for new software. Select Cancel and
press the OK button to nish search.
6. When detecting software update, the following result is
displayed.
7. Select Ye s and press the OK button to start updating. Select
No and press the OK button to return to the previous menu
without updating.
8. When completing the software update, the product is
automatically powered o and on again.
Note: The default password is 0000. If you have forgotten the
password, please contact your local product distributor.
