Assembly
9
GB
How To Assemble The Handle
For ease of assembly, attach the lower handle before
mounting the wheels.
1 Mount the lower handle (A) to the inside of the
edger frame (B). Fasten the lower handle with the
fasteners (C, D) shown in Figure 3. As you tighten
the fasteners, pull back on the lower handle.
2 Attach the right rear wheel (E) to the wheel
support rod (F) with the fasteners (G, H) shown in
Figure 4.
3 Attach the left rear wheel (J) and the short spacer
(K) to the edger frame with the fasteners (L, M)
shown in Figure 5.
4 Attach the front wheels (N) and long spacers (O)
to the front wheel arm (P) with the fasteners (Q, R,
S) shown in Figure 6.
D Locknut
5/16−18
A
C Bolt
5/16−18x5/8
B
Figure 3: Lower Handle
G
H Washer
1/2x3/4
F
E
Figure 4: Right Rear Wheel
M Locknut
3/8−16
K
L Shoulder Bolt
3/8−16x1.40
J
Figure 5: Left Rear Wheel
Q Bolt
5/16−18x4-1/2
R Washer
11/32x11/16
O
S Wide Flange
Hex Nut
5/16−18
N
Figure 6: Front Wheels
N
O
P
R Washer
11/32x11/16
R Washer
11/32x11/16
