Flash Pattern Configuration
RED every tap 1 Scene
GREEN every tap 2 Scene Non-Toggle (Always On)
GREEN / RED alternating 2 Scene Toggle
Turn LED Off (or Back On)
1) Press & Hold Set Button for 3 seconds - until you hear a beep
RemoteLinc 2’s LED will blink GREEN
2) Press & Hold Set Button a 2
nd
time for 3 seconds - until you hear a beep
RemoteLinc 2’s LED will blink RED
3) Press & Hold Set Button a 3
rd
time for 3 seconds - until you hear a beep
RemoteLinc 2’s LED will blink GREEN
4) Press the appropriate area of the paddle for the desired button/scene configuration
Desired LED Mode Button to Press
LED Off Bottom
LED On (default) Top
RemoteLinc 2 will (Beep)-(Beep), its LED turns off & returns to Ready Mode
Turn Beeper On During Usage (or Back Off)
1) Press & Hold Set Button for 3 seconds - until you hear a beep
RemoteLinc 2’s LED will blink GREEN
2) Press & Hold Set Button a 2
nd
time for 3 seconds - until you hear a beep
RemoteLinc 2’s LED will blink RED
3) Press & Hold Set Button a 3
rd
time for 3 seconds - until you hear a beep
RemoteLinc 2’s LED will blink GREEN
4) Tap Set Button
RemoteLinc 2’s LED will blink GREEN-GREEN
5) Press the appropriate area of the paddle for the desired button/scene configuration
Desired Beeper Mode Area to Press
Off (Default) Bottom
On Top
RemoteLinc 2 will (Beep)-(Beep), its LED turns off & returns to Ready Mode
Page 10 of 15 2444A3 Rev: 10/24/2011 10:43 AM
