Invacare 1600 Manual

A SERVICE OF

next previous

ACCESSORIES

Traverse Lift/Transporter 30 Part No. 1150696

Installing the Short Stretcher Padded Cover

NOTE:Forthisprocedure,referto3.onpage 29,FIGURE 6.2,FIGURE 6.3onpage31,

FIGURE 6.4onpage 31andFIGURE 6.5onpage 32.

NOTE:ThisprocedureappliestothePaddedMeshStretcherCover.

1. Pressandholdthebuttonsonthestretcherframe(Detail“A ”ofFIGURE6.1).

2. Raisetherightandleftendsofthestretchertoanuprightposition.

3. Positionthethreeseatstrapshorizontallyacrosstheseatframe(FIGURE 6.2).

NOTE:Theseatstrapsarelabeledwithan“S”onthebuckle.

4. Attachthethreeseatstrapstotheseatframe.

5. Ensurethebucklesareonthebottomoftheseat.

6. Tightentheseatstrapsuntil

theyaresnug.DONOTovertightenthestraps,otherwise

thewingarmswillnotlowersmoothlytotheflatposition.

FIGURE 6.2 Seat Straps

7. Ifnecessary,raisetherightorleftwingarmofthestretchertopreparetheheadend

(FIGURE 6.3).

8. Positionthetwobackstrapsverticallyontotheheadendofthe

stretcher.

NOTE:Thebackstrapsarelabeledwitha“B”onthebuckle.

9. Attachthetwobackstrapstotheheadendofthestretcher.

10. Ensurethebucklesareontheoutsideofthestretcher.

11. Ensurethetwobackstrapsaretight.

Seat Strap

Seat Frame

Buckle

Wing Arm

Wing Arm