ENGLISH
7
Basic Operation
Watch images from external devices.
Choosing an EXT terminal or PR 0 (AV) channel.
• The EXT terminals are registered after the PR 99 channel.
• Pressing button changes the choice as follows:
● To return to a TV channel:
● When the TV and VCR are connected only by the RF cable, the VCR
RF channel* must be preset to the PR 0 (AV) channel to view VCR
video. Choosing the PR 0 (AV) channel allows you to view images
from VCR video.
Pressing button changes the choice as follows:
Turn the TV on from standby mode.
Choose a channel or an EXT terminal.
Adjust the volume.
Press .
The volume level indicator appears.
Press –/+ while the volume level indicator is displayed.
Indicator is displayed.
Operating with the Buttons on the TV
oror
0
AV
P
P
0
AV
TV mode EXT modes
PR channel
number
EXT-1
EXT-4
EXT-2
EXT-3
TV
P
P
1 2 3
4 5 6
7 8 9
0
AV
oror or
0
AV
TV mode
EXT modes
PR channel
number
EXT-1
EXT-4
EXT-2
EXT-3
PR 0 channel
(Behind the front cover)
1
2
3
1
2
Notes:
• To use S-Video mode to view in-
put from an S-VHS VCR, see
“To choose S-VIDEO input” on
page 20. When choosing EXT-
2, EXT-3 or EXT-4 input termi-
nals as S-VIDEO input, E2, E3
or E4 changes to S2, S3 or S4 in
the display.
• If you don’t have a clear picture
or no colour appears, change
the colour system manually.
(See “Colour System” on page
17.)
• When choosing an EXT terminal
with no input signal, the EXT
number and ID become fixed on
screen.
Note:
• The VCR RF channel is the
channel that is sent as the RF
signal from the VCR. To set the
VCR RF channel to the PR 0
(AV) channel, refer to “Edit/Man-
ual” on page 24. Also refer to the
manual provided with the VCR.
eng_AV32-28WFX1EU_P1-11.fm Page 7 Wednesday, February 23, 2000 9:13 AM
