EN17
RECORDING
FULL
PHOTO
FULL
Snapshot mode with
no frame*
FRAME
Snapshot mode with
frame*
PIN-UP
Pin-Up mode*
MULTI-4
Multi-Analyzer 4
MULTI-9
Multi-Analyzer 9
* :There is a momentary
camera shutter-type
blackout together
with the sound effect
of a shutter closing,
which is recorded
together with the
image.
RECORDING
Advanced Features
Snapshot
Use your camcorder like a regular camera to take a
snapshot, or several of them in succession.
SNAPSHOT MODE SELECTION
1
Set the Power Switch to “ ” or “ ”.
2
Choose the appropriate Snapshot mode from the 5
available by repeatedly pressing MODE until the
desired snapshot mode indicator appears.
SNAPSHOT RECORDING
1
Press SNAPSHOT.
If you press during Record-Standby . . .
.... “PHOTO” appears and a still image will be
recorded for approx. 6 seconds, then the
camcorder re-enters the Record-Standby mode.
If you press during Recording . . .
.... “PHOTO” appears and a still image will be
recorded for approx. 5 seconds, then normal
recording resumes.
Motor Drive Mode
Keeping SNAPSHOT pressed provides an effect similar to
serial photography. (Interval between still images: approx.
1 second)
NOTES:
●
Even if “MULTI-4” or “MULTI-9” is engaged, Snapshot
recording will be performed in the FULL mode during
Digital Zoom.
●
If Snapshot recording is not possible, “PHOTO” blinks
when SNAPSHOT is pressed.
●
Even if Program AE with special effects (
੬
pg. 24) is
engaged, certain modes of Program AE with special
effects are disabled during Snapshot recording. In such a
case, the icon blinks.
●
During playback as well, all Snapshot modes are
available. The shutter sound is not heard.
Power Switch
Display
During snapshot
SNAPSHOT
Button
MODE Button
Snapshot mode
