No.51666
DLA-M4000LU
DLA-M4000LE
46
■ When a source setting “USER” is selected:
The “USER SOURCE setup menu” is displayed.
• On the “USER SOURCE setup menu (user)”, a source created
by the user can be selected.
•To select a user area, it must already be user-registered with the
“USER SOURCE setup menu”.
■ Remote control unit
■Submenu
M
E
N
U
/
E
N
T
E
R
QUICK
ALIGN.
AV HIDE
OPERATE
PRESET
AV
SHIFT ZOOM FOCUS
LENS
UT
+
DW
–
RGB/COMPUTER
LENS
LOCK UNLOCK
PAGE BACK
Changing (Setting) the Source (Cont.)
Operating the Main Menu (Cont.)
PAGE BACK button
MENU/ENTER button
SOURCE
(HDTV(1080i))
AUTO
NTSC(480i)
SDTV(480p)
HDTV(720p)
HDTV(1080i)
PAL/SECAM
PC-98
VGA1
VGA3
MAC13
VGA VESA
SVGA1
SVGA2
MAC16
XGA1
XGA2
MAC19
MAC21
SXGA1
SXGA2
SXGA3
USER
[SOURCE setup menu]
Select USER
1. Press MENU/ENTER toward the 5 or ∞ mark to
select a user area.
•The selected item (text display) is shown in magenta color.
2. Press MENU/ENTER down to set a source.
•By having a source set, the source for the projector
switches to the setting registered to the user source.
(SOURCE setup menu)
«
Notes
• The selected item is shown in magenta color. Items shown
in gray color cannot be operated or set in the current mode.
• Items that can be set are different when video signals are
input and when computer signals are input.
• For dedicated source signals (corresponding frequency, etc.)
for computer signals, see page 19.
SOURCE
(HDTV(1080i))
AUTO
NTSC(480i)
SDTV(480p)
HDTV(720p)
HDTV(1080i)
PAL/SECAM
PC-98
VGA1
VGA3
MAC13
VGA VESA
SVGA1
SVGA2
MAC16
XGA1
XGA2
MAC19
MAC21
SXGA1
SXGA2
SXGA3
USER
(SOURCE setup menu (user))
■ Pressing PAGE BACK twice will bring you back
to the main menu. To finish the main menu, press
PAGE BACK again.
USER1
USER2
USER3
USER4
USER5
USER6
USER7
USER8
HD1035I_R
HD1035I_Y
(HDTV(1080i))
SOURCE
47
Setting Up Channels
Submenu item [CHANNEL]
Operating the Main Menu (Cont.)
■ Remote control unit
■Main menu
Notes
• The selected item is shown in magenta color. Items shown
in gray color cannot be operated or set in the current mode.
• Items that can be set are different when video signals are
input and when computer signals are input.
• For dedicated source signals (corresponding frequency, etc.)
for computer signals, see page 19.
NTSC(480i)
ENGLISH
PIXEL CLOCK
POSITION
PICTURE
OPTIONS
SOURCE
CHANNEL
USER SOURCE SET UP
DISPLAY SIZE
DECODER
LANGUAGE
YPBPR
CH: 1
HDTV(1080i)
M
E
N
U
/
E
N
T
E
R
QUICK
ALIGN.
AV HIDE
OPERATE
PRESET
AV
SHIFT ZOOM FOCUS
LENS
UT
+
DW
–
RGB/COMPUTER
LENS
LOCK UNLOCK
PAGE BACK
When you set up channels, you can select a line and a multiple of
sources (up to 30) for each channel. If you are using a switcher and
set switcher numbers, you can also select each channel from the
switcher side.
Memo
• With multiple sources having been set on channels, when a channel is
selected, incoming signal is automatically checked and switched to one of
the sources registered on the channel.
If a matching source is not found among the registered sources, all other
available sources are searched to find a matching source.
1
Press the MENU/ENTER button.
• The main menu appears on the screen.
2
Press MENU/ENTER toward the 5 or ∞
mark to select a submenu item,
“CHANNEL”.
• The selected item (text display) is shown in magenta color.
3
Press the MENU/ENTER button to set.
• A submenu item, “CHANNEL setup/selection menu”, appears
on the screen.
•If no “LINE”, “SOURCE” or “SWNo” item is registered,
unregistered characters (7) are displayed on the screen.
PAGE BACK button
MENU/ENTER button
(CHANNEL setup menu)
4
Press MENU/ENTER toward the 5 or ∞
mark to select the channel (CH) whose
contents you want to change.
• The selected CH is shown in magenta color.
5
Press MENU/ENTER toward the 2 or 3
mark to select the item to set (LINE,
SOURCE or SWNo).
• The selected item is shown in magenta color.
• Unregistered channel items (LINE, SOURCE or SWNo) can also
be selected. However, “LINE” and “SOURCE” need to be already
set.
6
Press MENU/ENTER to set.
• Channel items LINE, SOURCE and SWNo) for the “CH” selected
on the “CHANNEL setup • selection” menu are set.
• For how to set each item, see pages 48 to 51.
1
2
3
4
5
6
7
8
9
(AUTO)
CHANNEL
NTSC(480i)
PAL/SECAM
777777777
777777777
777777777
777777777
777777777
777777777
777777777
777777777
10
77777
77777
77777
77777
77777
77777
77777
77777
Y/C
VIDEO
1
2
77
77
77
77
77
77
77
77
CH
LINE
SOURCE
SWNo
