21
AUDIO SETTING
Settings for the audio output balance, EMBEDDED AUDIO signals and level meter.
Item Content Setting value
BALANCE
Adjust the balance between the right and left speakers. L5 – L1, 0, R1 – R5
E.AUDIO GROUP
*1
Select the audio channel group of the EMBEDDED AUDIO signals.
The setting values and selectable audio channels of EMBEDDED AUDIO signals are as follows.
1G
2G
1-2G
3G
1-3G
1G
2G
1-2G
3G
1-3G
:
:
:
:
:
Channel 1/2/3/4/1+2/3+4/1 – 4 (1G)
Channel 5/6/7/8/5+6/7+8/5 – 8 (2G)
Channel 1/2/3/4/5/6/7/8/1+2/3+4/5+6/7+8/1 – 4 (1G)/5 – 8 (2G)/1 – 8 (1G+2G)
Channel 9/10/11/12/9+10/11+12/9 – 12 (3G)
Channel 1/2/3/4/5/6/7/8/9/10/11/12/1+2/3+4/5+6/7+8/9+10/11+12/
1 – 4 (1G)/5 – 8 (2G)/9 – 12 (3G)/1 – 8 (1G+2G)/1 – 12 (1-3G)
• G means GROUP
LEVEL METER SETTING
*1
Adjust the level meter display for the EMBEDDED AUDIO signals.
Example of the level meter display —Level meter position and audio channels
Ex.: When “LEVEL METER ch” is set to “LINE” and “BAR TYPE” is set to “3COLORS”
• The level meter with no audio signal input is displayed in white for “3COLORS”, and in gray for “W.100.”
• You can select the position of the level meter display—top or bottom of the screen (→ “POSITION” in
“INFORMATION” on page 24).
• When “PEAK HOLD” is set to “ON,” the maximum level meter value will remain displayed for a set period
of time.
– LEVEL METER ch
Select how the audio channels are displayed on the level meter. OFF
LINE
DIVIDE
LINE
DIVIDE
:
:
Displays the channels 1 – 6 at the left of the screen and 7 – 12 at the right.
Displays the odd channels at the left of the screen and the even channels at
the right.
– BAR TYPE
Select the color of the level meter display. 3COLORS
W.100
3COLORS
W.100
:
:
Coloring for each level
White
– REFERENCE LEVEL
Select the standard input level indicated on the level meter. −20dB, −18dB
– OVER LEVEL
Select the input level’s lower limit indicated in red for the “3COLORS” display. −10dB, −8dB,
−6dB, −4dB, −2dB
– BAR BRIGHTNESS
Select the brightness of the level meter. LOW, HIGH
– PEAK HOLD
Activates/deactivates the peak hold function of the level meter. OFF, ON
*1
Memorized for each input. In MIX mode, the setting only applies to audio signals input into SDI IN 1/L.
Green
REFERENCE LEVELOVER LEVEL
Red
Yellow
