30
Specifications
General:
Model name GD-V4200PZW/GD-V4200PZW-G/GD-V4200PCE/GD-V4200PCE-G
Frame colour GD-V4200PZW/GD-V4200PCE : Silver
GD-V4200PZW-G/GD-V4200PCE-G : Gray
Screen size Type 42 wide format
Aspect ratio 16:9 (Wide format)
Mass 36.0 kg (79.2 lbs)
External dimensions 103.5 x 64.0 x 8.9 cm (40
3
/4 x 25
1
/4 x 3
5
/8 inches) (W x H x D)
Power requirements AC 120 V/230 V, 50 Hz/60 Hz
Rated input current 3.9 A (AC 120 V)/2.1 A (AC 230 V)
Effective screen size 92.1 x 51.8 cm (36
3
/8 x 20
1
/2 inches) (W x H), 105.7 cm (41
5
/8 inches) diagonally
Number of pixels displayed 853 (H) x 480 (V)
Number of colors displayed 16.77 million (256 colors for each of RGB)
Compatible systems • VIDEO A, B input: NTSC, PAL, SECAM
• COMPONENT input: 480i, 576i, 480p, 720p, 1080i
Audio output INTERNAL: 2W + 2W (TYP at impedance 8Ω)
EXTERNAL: 3W + 3W (TYP at impedance 6Ω)
Speakers 2 pcs., built-in (4 cm x 7 cm oval-shaped, impedance 8Ω)
Operating conditions Temperature: 0˚C to 40˚C
Relative humidity: 20% to 80%
Input/output terminals*
VIDEO A • Y/C input Y/C terminal x 1 Y : 1V(p-p)/75Ω
C : 0.286V(p-p)/75Ω for NTSC
C : 0.3V(p-p)/75Ω for PAL/SECAM
• Video input BNC terminal x 1 1V(p-p)/75Ω
• Video output BNC terminal x 1 1V(p-p)/75Ω
• Audio input Pin jack terminal x 2 (L/R), 500mV(rms)/22kΩ or over
VIDEO B • Y/C input Y/C terminal x 1 Y : 1V(p-p)/75Ω
C : 0.286V(p-p)/75Ω for NTSC
C : 0.3V(p-p)/75Ω for PAL/SECAM
• Video input BNC terminal x 1 1V(p-p)/75Ω
• Video output Pin jack terminal x 1 1V(p-p)/75Ω
• Audio input Pin jack terminal x 2 (L/R), 500mV(rms)/22kΩ or over
COMPONENT input • BNC terminal x 3 Y : 1V(p-p)/75Ω
P
B/B-Y : 0.7V(p-p)/75Ω
P
R/R-Y : 0.7V(p-p)/75Ω
RGB input • D-sub 3 line 15-pin terminal x 1
Video signal : 0.7V(p-p)/75Ω
Sync signal : TTL level or 0.3V(p-p)/75Ω
• Audio input Pin jack terminal x 2 (L/R), 500mV(rms)/22kΩ or over
RS232C input D-sub 9-pin terminal x 1
SPEAKER OUT terminal Impedance 6Ω to 16Ω
Options (not supplied)
Stand Unit TS-C420P1W, TS-C420P4W, TS-C420P5W, TS-C420P7W
Wall Mounting Unit TS-C420P2W, TS-C420P6W
Ceiling suspension Unit TS-C420P3W
Video Interface Kit IF-C420P1W (Only for GD-V4200PCE and GD-V4200PCE-G)
* GD-V4200PCE and GD-V4200PCE-G do not have the following input terminals – VIDEO A, VIDEO B, COMPONENT and
RGB AUDIO.
Specifications and design are subject to change without notice.
Notice on transportation
This Monitor is precision equipment and needs dedicated packing material for transportation.
Never use any packing material supplied from other than JVC or JVC-authorized dealers.
24-32.GD-V4200PZW-A[EN]/f 00.2.23, 5:19 PM30
