EN37
Video unit equipped with
a DV input connector
Connection To A Video Unit Equipped With
A DV Connector
Connection to the GV-DT3 Digital Printer (optional) allows
you to print out images or transfer them to a PC. It is also
possible to copy recorded scenes from the camcorder onto
another video unit equipped with a DV connector. This
function is called Digital Dubbing (੬ pg. 39), which
offers virtually no image or sound deterioration.
1
Make sure all units are turned off.
2
Make connections to the device you want to connect
to using a DV cable, as shown in the illustration.
3
If necessary, connect the PC connection cable* to the
printer’s PC connector and the PC’s RS-232C
connector.
4
Turn the camcorder’s Power Switch to “ ” while
pressing down the Lock Button located on the switch
and turn on the other units.
NOTES:
●
It is recommended to use the AC Power Adapter/
Charger as the power supply instead of the battery pack
(
੬
pg. 9).
●
For Digital Dubbing, this camcorder can be connected
only to one device at a time. This camcorder can also be
used as a recorder (
੬
pg. 39).
●
If Still Playback, Slow-Motion Playback (GR-DVL507
only), Fast-Forward or Rewind is attempted with the
camcorder connected to a video unit via the DV
connector, the image will take on an effect similar to a
colored mosaic pattern or it will become black.
●
Also refer to the instruction manuals of the connected
units.
●
When using a DV cable, be sure it has a core filter
attached. The core filter reduces interference.
To DV IN/OUT
To DV
connector
Digital Printer
To DV IN
connector
PC
DV cable
(optional)
To PC
connector
PC connection
cable*
To RS-232C
Power Switch
Core filter
Core filter
Connector
cover
* Provided with GR-DVL507 only
Core filter
