15
10°
5m(16.4ft)
10°
30°
30°
PULL OUT BATTERY HOLDER
1
Pull out the battery holder by inserting a pointed instrument
into slot .
INSERT BATTERY
2
Insert the lithium battery *(CR2025), with its plus (+) side
up, into the battery holder.
REPLACE BATTERY HOLDER
3
Insert the battery holder into the remote control unit, and
push the holder until it clicks in place.
*Read warning on lithium battery. (
੬ P. 2)
Using The RM-V705U Remote Control Unit
The Full-Function Remote Control Unit can operate this camcorder from a distance as well as the basic
operations (PLAY, STOP, PAUSE, FF, and REW) of your VCR. This remote control unit makes additional
recording functions possible.
Buttons
Functions
With the camcorder’s power switch With the camcorder’s power switch set
set to “CAMERA”. to “PLAY”.
1Infrared beam Transmits the beam signal.
transmitting window
2ZOOM (T/W) buttons Zoom in and out (੬ pg. 17) —
3PLAY button — Playback start (੬ pg. 38)
4STOP button — Stop (੬ pg. 38)
5REW button Retake (Rewind) (੬ pg. 18)/ Rew/Rew Shuttle Search (੬ pg. 38)
Quick Review (੬ pg. 17)
6INSERT button — Insert Editing (੬ pg. 44)
7START/STOP button Functions same as the Recording Start/Stop button of the camcorder.
8INT. TIME button Self-Timer(੬ pg. 34)/Time Lapse (੬ pg. 35) —
9REC TIME button Animation/Time lapse (੬ pg. 35) —
0PAUSE button — Pause/Play (during Pause mode) (੬ pg. 38)
! FF button Retake (Forward) (੬ pg. 18) FF/FF Shuttle Search (੬ pg. 38)
@A. DUB button — Audio dubbing (੬ pg. 45)
The transmitted beam may not be effective or may
cause incorrect operation when the infrared beam
sensor window is directly exposed to sunlight or
powerful lighting.
A
Infrared beam
sensor window
Infrared beam
effective area
2
1
3
4
5
6
@
!
0
9
8
7
