15
Preparation
Configuring the Camera Settings
This section describes the settings necessary to use the unit. For the "MANAGE" settings not mentioned on these
pages, refer to page 46 .
Adjusting the clock
Adjust the internal clock. The time can be displayed
when videos are transmitted.
1 Select "COMMON SETTINGS" in "MANAGE".
If the sub settings are not displayed, click "+" on the
left of "MANAGE".
2 Click the "SET" button on the right of "CLOCK
ADJUST".
3 Enter the date and time.
4 Click the "SET" button.
The time is set, and the "COMMON SETTINGS"
screen reappears.
• If an incorrect value is entered, "INVALID DATA
INPUT" appears. Check the entered value.
• If communication to the camera fails,
"COMMUNICATION ERROR OCCURRED"
appears. Check the connection.
• If "PROCESS FAILED" is displayed, check the
camera and computer.
