Menus Settings: [ ] = Factory-preset
>
ZEBRA
The over-exposed sections of
the subject are displayed in
striped pattern on the screen.
Use this as a guide for adjusting
the brightness.
(In ! mode only)
1 [OFF]: Deactivates the function.
70%: Sections that are close to be over-exposed are
displayed in striped pattern.
100%: Sections that are over-exposed are displayed in
striped pattern.
NOTE
Correct the brightness by using the shutter speed or aperture
priority setting function.
^
SHARPNESS
Enhances the outline of the
subject.
(In ! mode only)
Adjust the sharpness using the touch sensor, then touch OK.
NOTE
Enhancing the sharpness causes the recorded image to appear
grainy.
High Speed Recording
You can capture fast-moving subjects clearly.
Preparation:
•
Select ! mode.
•
Select the recording mode.
1 Touch MENU.
2 Select [HIGH SPEED RECORDING].
3 Select the desired recording speed.
See the table below.
4 Press START/STOP to start recording.
Recording ends automatically when the
recording time limit is expired, even if you do
not stop recording.
NOTE
•
Video quality is fixed to XP mode.
•
Sound cannot be recorded.
•
Face detection cannot be set.
•
Only optical zoom is available.
•
When using the U (USER) button, pressing
the U (USER) button repeatedly changes the
setting.
Setting Image size
Recording time
(sec)
Playback time
(sec)
Aspect ratio
1 [OFF]
Deactivates the function.
120fps
480 x 270 4 8 16:9
300fps
480 x 116 4 20 16:3.9
600fps
640 x 72 2.4 24 16:1.8
fps = frames per second
