IMPORTANT
Notice the following information will help you to solve your problems.
Keep this IMPORTANT sheet together with the INSTRUCTIONS.
• After installing the unit
= Follow the procedure Å described below.
• If the unit does not operate
= Follow the procedure Å described below.
• If a disc is not ejected from the loading slot
= Follow the procedure ı described below. (If the procedure ı does not work, try the
procedure Å.)
• If a disc is not recognized (“No Disc,” “Loading Error,” or “Eject Error” flashes
on the display) even though there is a disc in the loading slot
= Follow the procedure ı described below. (If the procedure ı does not work, try the
procedure Å.)
Å To reset the microcomputer
Press the reset button on the control panel using a ball-point pen or similar tool.
This will reset the built-in microcomputer.
NOTE: Your preset adjustments—such as preset channels or sound adjustments—will also be
erased.
ı To eject a disc by force
While holding , press and hold 0 for more than 2 seconds.
(Be careful not to drop the disc when it is ejected.)
button
0 (eject) button
LVT1043-001A
[J/C]
Reset button
ImportantKD-SH9750[J]f.p65 03.2.13, 15:101
