9
ENGLISH
4. To set the other set-up menu items, repeat the
procedures 2 and 3.
5. Press the MENU button to quit.
Front panel
button
Function
displayed
Contents
MENU EXIT
Quit (or Release) the
<MENU> screen.
Notes:
● When the CONTROL LOCK function
is set to ON, pressing operation
buttons on the front panel will display
the message “CONTROL LOCK ON!”
on the screen for about 3 seconds.
● The CONTROL LOCK function is
maintained even when the power is
turned off.
● To turn off the CONTROL LOCK
function, while holding the MENU
button press the PHASE button. Then
set the CONTROL LOCK function to
OFF.
● Even when the CONTROL LOCK
function is set to ON, the following
operations are available:
– Power Switch operation.
– Sound volume adjustment with the
VOLUME/SELECT buttons.
– Display or disappear of the
<SET-UP MENU> screen.
Set-up menu items Purpose Settings
H. POSITION Adjusts the horizontal position of the
screen (+ : Horizontal position shifts
to the right/–: Horizontal position
shifts to the left).
–05 –04 • • –01 00 +01 • • +04 +05
WHITE BALANCE Adjusts the white balance. Selects DRIVE (DRV) or CUT OFF (CUTO) adjustment.
Screen setting is changed to the selected setting mode.
Select R/G/B buttons corresponding to the function display
to adjust.
DRIVE R.DRIVE Adjusts red level.
–09 –08 • • • • • • –01 00 +01 • • • • • • +08 +09
B.DRIVE Adjusts blue level.
–09 –08 • • • • • • –01 00 +01 • • • • • • +08 +09
CUT OFF R. CUT OFF Adjusts red cut off.
–09 –08 • • • • • • –01 00 +01 • • • • • • +08 +09
G. CUT OFF Adjusts green cut off.
–09 –08 • • • • • • –01 00 +01 • • • • • • +08 +09
B. CUT OFF Adjusts blue cut off.
–09 –08 • • • • • • –01 00 +01 • • • • • • +08 +09
CONTROL LOCK Sets the operation buttons on the
front panel to control lock mode.
02-15EN_TM-A14E_f.indd 902-15EN_TM-A14E_f.indd 9 06.6.9 3:13:34 PM06.6.9 3:13:34 PM
