EN 77
T
W
1 2
3
4
5
9
!
0
@
8
#
7
6
1
2
3
Remote Control Unit (optional)
The RM-V712U remote control unit is included in the optional VU-V63KITU Station Kit.
1 PAUSE IN connector (੬ pg. 63)
Connects to a camcorder using an editing cable
when performing Random Assemble Editing.
2 START/STOP button (੬ pg. 20)
Starts recording, or stops recording and puts the
camcorder in the record-standby mode.
3 AUDIO MONITOR button (੬ pg. 53)
Changes the sound output during playback.
4 MBR SET button (੬ pg. 62)
Enables VCR brand setting.
5 Up/Down button (੬ pg. 50)
Moves the image around on the display to find a
particular portion of the picture.
6 Operation buttons (੬ pg. 48 – 51, 62)
Operates the camcorder or VCR.
7 R.A. Edit buttons (੬ pg. 63 – 67)
Allows you to make an original edited tape.
8 EFFECT buttons (੬ pg. 51)
Selects, activates and deactivates playback
effects.
9 FADE/WIPE button (੬ pg. 63, 64)
Selects Fade/Wipe effects during Random
Assemble Editing.
0 SLOW Rewind/Forward buttons
(
੬ pg. 49, 50)
Performs slow-motion playback.
Left/Right buttons (੬ pg. 50)
Moves the image around on the display to find a
particular portion of the picture.
! SHIFT button (੬ pg. 50, 62)
Enables the use of the Up/Down/Left/Right
buttons during playback or the VCR Operation
buttons.
@ DISPLAY button (੬ pg. 60)
Turns the display on or off on the connected TV.
# Zoom buttons (੬ pg. 24, 50)
Magnifies the picture during recording or
playback.
Installing The Battery
1 Pull out in the direction of the arrow while
pressing the knob as shown.
2 Insert the battery in the holder, and be sure to
have the “+” mark visible.
3 Slide the holder back in until you hear a click.
NOTE:
Read the caution concerning lithium batteries
(
੬
pg. 2).
Knob
