FEATURES FOR RECORDING
38 EN
MasterPage: Left
Manual exposure control is recommended in
the following situations:
●
When shooting using reverse lighting or when
the background is too bright.
● When shooting on a reflective natural
background such as at the beach or when
skiing.
● When the background is overly dark or the
subject is bright.
1 Open the LCD monitor fully.
2 Set the Power Switch to “REC”.
3 Set the recording mode to “ ”. (੬ pg. 20)
4 Press MENU.
5 Select “FUNCTION”, press SET or 2.
6 Select “EXPOSURE”, press SET or 2.
7 Select the appropriate exposure, press SET
or
2.
●
To brighten the image, press 3. To darken the
image, press 4. (maximum +/-6)
8 Press MENU.
NOTES:
● If the adjustment does not cause any visible
change in brightness, set “GAIN UP” to “AUTO”.
(
੬ pg. 31, 33)
● You cannot use the manual exposure control at
the same time when “PROGRAM AE” is set to
“SPOTLIGHT” or “SNOW” (
੬ pg. 41), or with
the backlight compensation.
Like the pupil of the human eye, the iris
contracts in well-lit environments to keep too
much light from entering, and dilates in dim
environments to allow in more light.
Use this function in the following situations:
●
When shooting a moving subject.
● When the distance to the subject changes (so
its size in the LCD monitor or the viewfinder
changes), such as when the subject is backing
away.
● When shooting on a reflective natural
background such as at the beach or when
skiing.
● When shooting objects under a spotlight.
● When zooming.
1 Perform steps 1 - 6 in “Exposure Control”
(੬ pg. 38)
2 Adjust zoom so that the subject fills the
LCD monitor or the viewfinder, then press and
hold SET or
2 for over 2 seconds. The “ ”
indication appears.
3 Press SET or 2. The iris is locked.
4 Press MENU.
Exposure Control
EXPOSURE
±
0
Select
SET
Iris Lock
GR-D790US.book Page 38 Tuesday, November 7, 2006 1:39 PM
