29
PROGRAM TIMER
( DAILY) START END MODE
1. – – – – – – – : – – – – : – – – – H
2. – – – – – – – : – – – – : – – – – H
3. – – – – – – – : – – – – : – – – – H
4. – – – – – – – : – – – – : – – – – H
5. – – – – – – – : – – – – : – – – – H
6. – – – – – – – : – – – – : – – – – H
7. – – – – – – – : – – – – : – – – – H
8. – – – – – – – : – – – – : – – – – H
PRESS (SHIFT, SET, RESET)
PRESS (MENU) TO END
PROGRAM TIMER
( DAILY) START END MODE
1. – – – – – – – : – – – – : – – – – H
2. – – – – – – – : – – – – : – – – – H
3. – – – – – – – : – – – – : – – – – H
4. – – – – – – – : – – – – : – – – – H
5. – – – – – – – : – – – – : – – – – H
6. – – – – – – – : – – – – : – – – – H
7. – – – – – – – : – – – – : – – – – H
8. – – – – – – – : – – – – : – – – – H
PRESS (SHIFT, SET, RESET)
PRESS (MENU) TO END
PROGRAM TIMER
( DAILY) START END MODE
1. 3 0 – –6 – 8 : 3 0 1 7 : 1 5 – 3 H
2. – – – – – – – : – – – – : – – – – H
3. – – – – – – – : – – – – : – – – – H
4. – – – – – – – : – – – – : – – – – H
5. – – – – – – – : – – – – : – – – – H
6. – – – – – – – : – – – – : – – – – H
7. – – – – – – – : – – – – : – – – – H
8. – – – – – – – : – – – – : – – – – H
PRESS (SHIFT, SET, RESET)
PRESS (MENU) TO END
PROGRAM TIMER
( DAILY) START END MODE
1. 3 0 – –6 – 8 : 3 0 1 7 : 1 5 – 3 H
2. 1 – 7 1 0 : 0 0 2 2 : 0 0 2 4 H
3. – – – – – – – : – – – – : – – – – H
4. – – – – – – – : – – – – : – – – – H
5. – – – – – – – : – – – – : – – – – H
6. – – – – – – – : – – – – : – – – – H
7. – – – – – – – : – – – – : – – – – H
8. – – – – – – – : – – – – : – – – – H
PRESS (SHIFT, SET, RESET)
PRESS (MENU) TO END
7-3 Timer Recording
7 RECORDING
Start time (hour)
Start time (minute)
Stop time (minute)
Stop time (hour)
Record mode
Program No.
Blinking
.
.
.
16.30.00
TIMER
2
1
Program No.
VCR's display
Timer
Select the timer program No.
Press the [SHIFT +] or [SHIFT -] button to move the
cursor arrow to the program No. to be set.
• Press the [SHIFT +] button to move the cursor arrow
down and the [SHIFT -] button to move it up.
Set the selected program No.
Press the [SET +] or [SET -] button.
[ The selected program No. blinks.
• Press the [SET +] button. The day blinks.
• Press the [SET -] button. The record mode blinks.
Set the timer.
Press the [SHIFT +] or [SHIFT -] button until the item
you want to set starts blinking.
• Press the [SHIFT +] button to shift the blinking to
the right.
"Day"
[ "Month"[ "Start time (hour)" [ "Start time
(minute)"
[ "Stop time (hour)"[ "Stop time (minute)"
[ "Record mode" [ Select the next program No.
• Press the [SHIFT -] button to move the blinking to
the left.
Press the [SET +] or [SET -] button to set the value
for the blinking item.
• Press the [SET +] button to increase the value and
the [SET -] button to decrease it.
Ⅲ Set the "Day", "Month", "Start time (hour)", "Start time
(minute)", "Stop time (hour)", "Stop time (minute)" and
"Record mode" with the [SHIFT +/-] and [SET +/-]
buttons.
[ When all values are set, the set program No. is
shown on the VCR's display.
Accessing another program No.
• Select the "Record mode" (so that it is blinking) and
press the [SHIFT +] button. Or, select "Day" (so that it
is blinking) and press the [SHIFT -] button.
[ The selected item stops blinking. You may now
select another program No.
To set more than one daily timer program, repeat
steps 4 to 7.
• To switch the daily timer program to the weekly
timer program, move the cursor arrow on the
second line <DAILY> and press the [SET+] or
[SET-] button. (For details, refer to page 30.)
To end timer programming, press the [MENU] button
twice.
[ The normal screen is restored.
Ⅲ Press the [TIMER REC] button.
[ • The TIMER indication and the daily timer
program numbers light in the VCR's display.
Power is switched off automatically and the VCR
enters the Timer Record Standby mode.
• During timer recording, the number of the daily
timer program currently being executed blinks.
Month
Day
