A SERVICE OF

logo

35
Item Content
DC OFFSET Standard level (brightness) for controlling the DC
auto iris operation is set.
Increasing the value: the screen will become darker
[Setting range: 100 ~ 120 ~ 150]
Memo
Depending on the lens, hunching may occur when setting
this value too high. In this case, lower the value.
CAMERA TITLE Default setting: OFF
Whether to display the camera title is set.
OFF : Camera title is not displayed.
ON : Camera title is displayed.
V PHASE
Vertical phase during line lock is adjusted. The vertical phase can
be adjusted to other cameras. This setting is enabled when the LL/
INT switch on the back of the unit is set to LL.
Press the SELECTOR button in
the horizontal direction (8 or t)
to set. Pressing in the button to
the right (t) will advance the
phase and pressing to the left
(8) will delay the phase.
LENS
EXIT
CAM TITLE OFF
CAM
E
E
R
R
A
A
VPHASE
TITLE EDIT
ADJUST ..
084 401
C— — — — — —AMERA ISETT NGS
Set value
4.
When selecting EXIT and press-
ing the SET button, the screen
will return to the CAMERA SET-
TINGS screen.