35
A Camera ID Character strings entered here will be written to the JPEG comment segment
(item name: camera). Refer to the API Guide on the file formats of JPEG.
B
Monitor Type
For selecting the monitor type according to the monitor used to display the
video images. The picture quality varies according to the type of monitor
selected.
Custom : Enables setting of picture quality according to the user’s
preference.
LCD1, LCD2 : Picture quality setting for LCD monitors. Two types are
available for selection according to the user’s preference.
CRT : Picture quality setting for CRT (cathode-ray tube) monitors.
[Set values: Custom, LCD1, LCD2, CRT]
C Black Level For adjusting the black level. Lowering the value darkens the video image.
Increasing the value brightens the image.
[Setting range: 0 ~ 2]
Note:
● If the black level is set to “0”, this may be too low depending on the
monitoring device, or dark area will become complete black.
● When using MPEG4 images, set to either “1” or “2”.
D Gamma To alter the appearance of dark areas in a video image, adjust the gamma
curve.
Off : Do not perform gamma correction. The entire image appears
dull.
-3 ~ 3 : Perform gamma correction. When this is set to “0”, standard
gamma correction is performed. Setting to a smaller value
darkens the image, while increasing the value brightens the
image.
[Set values: Off, -3 ~ 0 ~ 3]
Note:
● The set value is fixed when the monitor type is set to ALCD1B, ALCD2B, or
ACRTB.
E Enhance
Frequency
For setting the type of edge enhancement.
Low : Enhances both thick and thin edges.
High : Enhances thin edges.
[Set values: Low, High]
Note:
● The set value is fixed when the monitor type is set to ALCD1B, ALCD2B, or
ACRTB.
F Enhance Level For setting the intensity of edge enhancement.
Larger value : Increases the intensity of edge enhancement.
Smaller value : Decreases the intensity of edge enhancement.
[Setting values: -5 ~ 0 ~ 5]
G Color Level For adjusting the color level.
Larger value : Increases the color level.
Smaller value : Decreases the color level.
[Setting values: -5 ~ 0 ~ 5]
VN-V25U_EN.book Page 35 Friday, November 2, 2007 11:26 PM
