Status lights
The status lights indicate the condition of the printer. There are two status lights on the printer: one indicates power,
the other indicates Wi-Fi status.
Power status light
Power light What it means
Off The printer is turned off.
Press the power button to turn on power.
The printer does not have power.
Make sure that the power cord is plugged into the back of the printer and into an electrical outlet, and
that the electrical outlet has power.
Blinking The printer is busy.
Wait for the printer to finish the task.
On The printer is ready.
Wi-Fi status light
Wi-Fi status light What it means
Off The Wi-Fi radio is either turned off or is turned on but not connected to a wireless network.
Blinks continuously The Wi-Fi radio is turned on, and the printer is searching for available wireless networks within
range.
Blinks intermittently The Wi-Fi radio is turned on and the printer cannot find any available wireless networks within
range, or the Wi-Fi radio connection has been interrupted or is too weak to send signals.
To find and connect to an available wireless network within range, press OK, turn the Wi-Fi
radio off, and run the Wi-Fi Set-Up Wizard (see Connecting to a wireless network, 5).
On The Wi-Fi radio is turned on, and there is a working connection between the printer and a
wireless network.
KODAK HERO 2.2 All-in-One Printer
www.kodak.com/go/aiosupport 83
