A SERVICE OF

logo

Open as PDF
next previous
11-9
11
Camera Care
Cleaning the Imager
If the imager is dirty, gently blow off the dust using commercially available “canned air.”
If the imager is still dirty, contact your dealer or service representative.
Reassembling the Camera
Reassemble your camera after inspecting or cleaning the imager.
1 Press and hold the SELECT
button and rotate the Main-
Command dial to highlight Yes
in the Close shutter screen.
The mirror lowers and the
shutter closes.
2 Turn the camera Off.
3 Replace the antialiasing filter
(page 11-3), if necessary.
4 Replace the lens.
5 Turn the camera On.
6 Capture an image of a plain
white object and verify that
there are no imperfections.