14
Wireless Printer Server: WPS-9123
The LAN cable is connected to the Print Server.
Network traffic transferring or receiving through
the LAN port.
If the Printer Server is upgraded failed, the LED
will be lighted steadily.
The Printer Server is sending printing jobs to
printer.
If the Printer Server is upgraded failed, the LED
will be lighted steadily.
The wireless mode of the Printer Server is
disabled or auto but wire cable is connected.
Network traffic transferring or receiving through
the Wireless.
The Printer Server is ready.
If the Printer Server is upgraded failed, the LED
will be lighted steadily.
The Printer Server is failed to reboot.
Reboot (Press the reset button with a pencil tip for more than 3 seconds)
When press the reset button for more 3 seconds the Power LED will be blinking slowly. While
Printer Server is rebooting, the Power/Print/WLAN LEDs are all ON. When only the Power
LED is ON, the rebooting is completed.
Reset to Factory Default (Press the reset button with a pencil tip for longer than 5 seconds)
When press the reset button for longer than 5 seconds the Power LED will be blinking. Then
the Power/Print/WLAN LEDs are all ON. When only the Power LED is ON, the Printer Server
is reset to factory default settings.
