126
9.4 Modify Setting Values – “set” Command
“set” command is used to modify the setting values of this printer
server. The format of “set” command is as following:
set argument_name value
Then the value will be written into the system configuration. For
example, if you want to set IP address of the printer server to
192.168.2.2, type “set ip 192.168.2.2” command and the IP of the printer
server will be changed. After the setting is finished, please reboot the
printer server.
admin# set ip 192.168.2.2
admin# reboot
If you enter only “set”, the system will list all arguments of “set”
command and the command format.
The following table lists all the arguments whose value can be
modified by “set” command:
Enable or disable the wireless
LAN function.
The value should be “disabled”,
“enabled” or “auto”
Wireless LAN mode is
Infrastructure or Ad Hoc.
The value should be “inf” or “ad
hoc”
ESSID of the wireless LAN
Channel number used by wireless
LAN.
The value should be 1~14.
The mode of WEP.
The value should be “disable”,
“wep64” or “wep128”
Default WEP key number.
The value should be 0~3.
0: key 1
1: key 2
