12
206-4213
Automated Installation Routine Wizard (Cont.)
Pro:Centric Manual Conguration
If you already know the settings (i.e., Data Channel and Pro:Centric Application Mode) that need to
be congured in order for the TV to connect to the Pro:Centric server, you may streamline the setup
process by entering this data manually.
1. Use the Up/Down arrow keys on the Installer Remote to select/highlight Pro:Centric Manual
from the Automated Installation Routine Wizard Welcome screen. Then, press OK.
In the rst Manual Conguration Screen (see example below), you will be able to congure
the appropriate Pro:Centric settings. Use the Up/Down arrow keys on the Installer Remote to
navigate between elds.
Note: Select the “Back” button from the Manual Conguration screen or press the key on the
Installer Remote, if desired, to return to the Welcome screen.
Manual Configuration
Pro:Centric Mode
Channel Number
Signal Strength
0%
GEM
1
< >
BACK
NEXT
Save and Exit
OK
Move
Prev.
Manual Configuration
Processing Pro:Centric Configuration.
Step 4 may take up to 5 min(s).
Please wait...
Step 1 Detecting the type of Pro:Centric network
Step 2 Locating the Pro:Centric Server
Step 3 Determining the Pro:Centric mode
Step 4 Downloading the application files
Step 5 Downloading the maintenance files
Step 6 Saving the Pro:Centric configuration
Warning - Do not remove AC power or the signal cables during these steps
50%
RF
DIGITAL 75
GEM
In Progress
:
:
:
:
:
:
Prev.
2. In the Pro:Centric Mode eld, use the Left/Right arrow keys to
select the appropriate Pro:Centric Application Mode—GEM,
FLASH, or Conguration Only.
Note: For remote management only, select the Pro:Centric
Mode “Conguration Only” option to search for TV E-Z
Installation data downloads. Pro:Centric application data will
not be downloaded.
3. In the Channel Number eld, either key in or use the Left/
Right arrow keys to select the RF channel number for the
Data Channel of the Pro:Centric server. The Data Channel
can be set from 1 to 135.
4. Once all elds are completed as required, you may have two
options (see also note below):
• To save the data entered and exit the wizard, use the
arrow keys to select Save and Exit, and then press OK.
The Pro:Centric application and/or E-Z Installation data
will be downloaded to the TV at a later time. This option is
useful, in particular, if the Pro:Centric server has not yet
been congured.
• To initiate a real-time download of Pro:Centric application
and/or E-Z Installation data, use the arrow keys to select
Next, and then press OK.
The Pro:Centric Manual Conguration will proceed with
the remaining Pro:Centric application and/or E-Z Installa-
tion data download steps, as shown on the second Manual
Conguration screen (see example at right). When the
Pro:Centric Manual Conguration is complete, the wizard
exits, and the TV will turn OFF.
Note: The RF signal must be detected on the Data Channel
of the Pro:Centric server in order for you to select “Next” (you
will see a “Data Channel found” message below the signal
strength indicator).
