1 2 3 64 5
1. EXTERNAL SPEAKER (8 ohm output)
Connect to optional external speaker(s).
*For further information, refer to ‘Speaker & Speaker Stand’
manual.
2. RS-232C INPUT(CONTROL/SERVICE) PORT
Connect to the RS-232C port on a PC.
3. RGB2 INPUT(DIGITAL RGB INPUT)/RGB1 INPUT(PC
INPUT)/AUDIO INPUT SOCKET
Connect the monitor output socket of the PERSONAL COM-
PUTER to this socket.
RGB1 OUTPUT(PC OUTPUT) SOCKET
You can watch the RGB1 signal on another monitor, connect
RGB1 OUTPUT (PC OUTPUT) to another monitor’s PC
input port. When the monitor is in standby mode, you can not
watch the RGB1 signal on another monitor.
4. CONTROL LOCK Switch
REMOTE CONTROL
When “CONTROL LOCK” is set “ON”, Monitor is operated by
the external control device.
5. AUDIO / COMPONENT(480i/480p)(DVD INPUT) / S-VIDEO
/ VIDEO INPUT / AUDIO INPUT SOCKETS
EURO SCART SOCKET
Note : The interface board(AP-42EA40/41) is not equipped
on MT/MZ-42PZ42/43 series models. Contact your dealer
for buying this optional item.
6. POWER CORD SOCKET
This Monitor operates on an AC power. The voltage is indi-
cated on the Specifications page. Never attempt to operate
the Monitor on DC power.
