Basic operation
Ensure your UNIDISK SC is in Disc mode (see
First of all
at the beginning of this
chapter).
To play a disc:
●
Press on the handset or on the front panel.
●
Insert a disc with the playback side facing down.
●
Press on the handset or on the front panel.
The disc drawer closes and playback begins automatically.
Notes:
The disc drawer can be closed by nudging it. In this instance CDs, DVD-Video discs, Video
CDs and some DVD-Audio discs will begin playback automatically. Other disc types will not.
If the disc is a DVD-Video, DVD-Audio, Video CD or Super VCD a menu may appear on
your display device (see
Using DVD-Video and DVD-Audio menus
, this chapter).
Be careful not to scratch the playback surface of your discs as this can affect their
performance. Be particularly careful with DVD-Videos.
Certain types of disc may take up to 15 seconds before they begin playing.
To pause a disc:
●
Press on the handset or on the front panel.
●
To resume playback, press or again.
To stop playback:
●
Press on the handset or on the front panel.*
To remove a disc:
using the handset –
●
Press and hold until the disc drawer opens.
●
Remove the disc then press or nudge the disc drawer to close.
using the front panel –
●
Press .
●
Remove the disc then press or nudge the disc drawer to close.
Note:
If the drawer is left open it will close automatically after two minutes.
*If the disc is a Video CD or Super VCD and PBC is turned on (see
Additional
information on Video CDs and Super VCDs
, this chapter), press and hold on
the handset or on the front panel.
