74
Settings
Diagnostics
Displays diagnostic information on NMEA 2000 networks displays the status of
information shared between units (UDB). From the UDB tab, you also can select a
unit to be used as the master (primary) unit when sharing information. To access the
Diagnostics screen, select Diagnostics from the Network menu and press ENTER.
NMEA 2000 receive/send waypoint
Turns on/off the unit’s ability to send and receive waypoints across a NMEA 2000
network. NMEA 0183 receive waypoint controls the unit’s ability to receive way-
points over a NMEA 0183 network.
To turn on/off NMEA send/receive waypoint commands, highlight the desired
NMEA send/receive option and press ENTER.
When your unit has access to GPS, waypoints will be automatically received/sent
when the feature is turned on.
To view waypoints:
1. Access Utilities from the Pages menu.
2. Select Waypoints and press ENTER.
Serial Ports
Congures communication ports to send or receive data with another electronic
device, like an autopilot.
Diagnostics screen: NMEA 2000
Diagnostics screen: UDB
NOTE: To send waypoints, your must have access to GPS through an
NMEA 2000 network.
