20 Accessing Files in Flash Memory
MX6 User’s Guide E-EQ-MX6OGWW-E-ARC
Accessing Files in Flash Memory
My Documents Folder
Start | Programs | File Explorer | My Device | My Documents
Programs and files located in this folder are saved through a hard and soft reset if they had been
saved prior to resetting.
The IPSM Folder
Access: Start | Programs | File Explorer | My Device | IPSM
Programs and files located in the IPSM folder are saved through a hard reset. Backed up registry
settings are automatically restored after a hard reset.
When adding a new CAB file to the IPSM/AutoInstall folder:
1. First delete the RegBackup file in the IPSM folder.
2. Add the new CAB file, then perform a hard reset.
3. Reconfigure all settings, including the setting for the newly loaded CAB file.
4. Then run RegBackup to save all settings.
CAB files stored in the AutoInstall folder within the IPSM folder are automatically unpacked
following a hard reset.
If necessary, restore default registry settings by deleting the RegBackup file in the IPSM folder
and then perform a hard reset.
Saving Your Changes
To ensure that changes you make in control panels and other software, such as RFTerm, are saved
to the archive registry and the active registry, follow the procedure below:
1. Make the change.
2. Reset (warm boot) the mobile device.
3. Test the change.
4. Tap Start (or the
) | Utils (or Power Tools) | RegBackup to permanently save the
settings.
Refer to the MX6 Reference Guide for more information.
