LXE E-EQ-VX3XDKRG-C-ARC Manual

A SERVICE OF

next previous

Strain Relief Cable Clamps

Strain Relief Cable Clamps

Equipment Required: Phillips screwdriver (not supplied by LXE)

There are two strain relief cable clamps secured to the VX3X endcap.

Use the strain relief clamps to secure audio, power, and I/O cables attached to the VX3X.

1. Remove the strain relief clamp from the endcap by turning the screw counterclockwise. Put the screw aside in a safe loca-

tion.

2. Slide the strain relief clamp over the cable.

3. Using a Phillips screwdriver and the screw that was removed, refasten the clamp holding the cable to the endcap. Do not

stretch the cable. Leave enough slack in the cable to allow it to be connected and disconnected easily when needed.

4. Continue in this manner until all cables are secured to the VX3X endcap.

E-EQ-VX3XDKRG-C-ARC [ 11 ] VX3X Cradle Reference Guide