A SERVICE OF

logo

6 Introduction
MX3 Multi-Charger User’s Guide E-EQ-MX3CHGROG-F-ARC
Installation and Operation
Introduction
The life and capacity of a Lithium Ion battery can vary significantly depending on the discharge
current and the environment in which it is used. As with all batteries, expect to see a reduction in
the total number of operations a fully charged battery pack can deliver as it ages. Charging times
may increase but will not exceed four hours. Battery packs do not need to be fully discharged
between charge cycles.
Setup
Ensure that the location you choose for the battery charger is well ventilated.
Place the charger on a horizontal, hard surface.
Plug the power cord into a properly grounded outlet.
On initial power-up, all 6 LEDs will light yellow for a few seconds.
Figure 3 Multi-Charger Charging Pocket
1. Battery Charging Pocket
2. Retaining Pins
3. Battery Charger Contacts
4. LED Indicator