A SERVICE OF

logo

14
EN
USB Flash Memory
This unit offers easy playback MP3 music and JPEG picture les.
Insert the USB ash memory into the USB terminal shown
below. [MP3/JPEG Playback]
p. 31
side of this unit
Note
The USB ash memory is not supplied with this unit.
Do not use an extension cord between the USB ash memory and the unit.
Always insert the USB ash memory to this unit directly.
We do not guarantee the all USB ash memory can be supported on this
unit.
Be sure to keep a backup copy of the original les on your device before
you play them back on this unit. We have no responsibilities for damage or
loss of your stored data.
When you are ready to remove a USB ash memory device, you must let
the unit go to the standby mode rst to avoid any damage for your data
and the unit.
If the USB ash memory left behind in the USB terminal and the unit goes
to the standy mode, the “USB”(main menu) will appear automatically when
you turn on the unit again.
Cable Management
Keep the cables through this holder to avoid tangling them.
rear of this unit
Use the following accessory with this connection:
• AC power cord x 1
Plug In the AC Power Cord
Make sure that the AC power cord must be plugged to an AC
outlet after all the necessary connections are completed.
AC power cord
AC outlet
rear of this unit
Caution:
Do not connect the AC power cord to a power supply outside the
indicated voltage of this unit (AC 120V).
Connecting the AC power cord to a power supply outside of this range may
result in re or electrical shocks.
Note
Each time you plug in the AC power cord, no operations will be performed
for a few seconds. This is not a malfunction.